The Quikscribe Player Software requires a sound card and a headset (or speakers) to work correctly. If you cannot hear any audio being played, here are four possible reasons: Your speakers or headset may not be correctly plugged in. Check to see they are plugged into the correct output jack. If your sound card is color coded, Green normally represents the speaker output, and Black means Line Out. It is preferable to use the Speaker output because the signal will be amplified, whereas the Line Out jack will require amplification Your speakers or headset may not be working. To check, plug in a known working set and test again. Your output volume level may be too low, which means you will have to adjust the audio level of your sound card. It is possible that your sound card is not working, not installed or incorrectly installed. To resolve the issue, contact your Network Administrator to re-install or replace your sound card or sound card drivers. Note: If you want to load …
Transcription
Foot Switch
To use the Triple Action Foot Switch: Hold the PLAY pedal down to PLAY. Release the PLAY pedal to STOP. Hold the REW pedal down to REWIND. Release the REW pedal when you want to STOP. Hold the FWD pedal down to FAST FORWARD. Release the FWD pedal when you want to STOP. When the audio file is STOPPED, Quikscribe will automatically BACKSPACE a fixed distance. To alter the Backspace distance, click on the Playback Controls icon and vary the Backspace distance. Reverse the FWD and REW Actions on a Triple Action Foot Switch On the Triple Action Foot Switch you press down on the right pedal to REWIND and the left pedal to FAST FORWARD. If you would like to reverse these actions, click the Quikscribe Settings icon, then select the Preferences tab. Within the Preferences tab, check the Reverse Footswitch box. The REWIND function will then be on the left pedal and the FAST FORWARD will be on the right. …