Quikscribe Recorder sends files across a network to you and you will be notified by Quikscribe to transcribe the files. To initialize this process, shared folders need to be properly set-up and configured. You will access these folders. If you cannot access the shared folders, see the section Create shared folders on network drive in the Quikscribe Recorder manual, which describes setup of your send destination locations and associated sub-folders. Do the following to configure Quikscribe Player to receive files through a Network: 1. Open Quikscribe Player. Click the Open Audio icon. 2. Select Settings in the menu at the top left. Select Path Maps. 3. Click the Quikscribe Settings icon. 4. Select LAN in the top left drop-down box. 5. In the Drives box select your shared network drive. Your drive may be F: or Q: or another letter as established by your network administrator. 6. In the Folder box double-click the shared network drive, then …
Quikscribe Player
Main Interface
Open the Quikscribe Player. You will see the main interface as shown below. Below is the main interface as it appears during playback. File and playback information is labeled. The file name of the current recording is shown in the top bar of the screen. The bar at the bottom of the screen shows the status of the recording. Please review the interface. The user interface has been designed to be relatively simple to use and understand. The Icon Toolbar is shown below with the function of each toolbar labeled. …
Windows 8
To install Quikscribe in Windows 8 OS, please do the following: 1. Download the installer from this link. Select whether you are downloading the Recorder or the Player. In this example, we will download and install the Quikscribe Recorder. 2. Right-click the download link using your mouse and select Save Link As. If you are using Chrome - Save Link As; for IE and Firefox, select “Save Target As.” 3. Save it to your computer. I suggest saving it to your Desktop, so you can easily find it later. See sample below: 4. Once saved, open the folder that contains the installer. Right-click using your mouse and select Properties 5. In the new window that will pop up, go to the General tab. At the bottom, click on Unblock. Then clickApply. 6. Next, in the same window, go to Compatibility tab. Put a check mark on the box before Run as Administrator. Click Apply. Then click OK. 7. You may now install Quikscribe. See screenshots …